Range Hoods at Dan's Appliance

Hood width should equal or exceed the width of the cooking surface — wider is generally better for capture efficiency.

Ducted (vented) hoods exhaust air outside; recirculating (ductless) hoods filter and return air. Ducted installation requires a duct path to an exterior termination.

Duct size, total length, and number of turns affect blower performance — verify the exact model's installation guide for minimum duct diameter and maximum equivalent duct length.

Blower performance is rated in CFM (cubic feet per minute). Higher BTU cooking surfaces generally require higher CFM. Confirm the exact model's CFM rating and duct requirements before ordering.

Sound ratings (sones or dBA) vary by model and speed setting — check the specification sheet for the exact model.

Mounting height above the cooking surface is exact-model specific. Verify the minimum and maximum mounting heights in the installation guide.

Cabinet, ceiling, and wall conditions (material, stud spacing, soffit depth) affect installation. Confirm with your installer before ordering.

Some jurisdictions require makeup-air systems when exhaust CFM exceeds a local code threshold. Consult a licensed contractor for code requirements in your area.

Electrical requirements (circuit size, outlet location) vary by model — confirm with your electrician before installation.

Professional installation is strongly recommended. Dan's Appliance can advise on site requirements before your order is finalized.